Fujitsu MX130 S2 manual Replacing the processor heat sink, Processors, Supported processors

Processors

11.1Basic procedure

Supported processors

–AMD FX, AMD Sempron, Athlon II, Phenom II

–Socket type: AM3+

–Thermal Design Power (TDP) class: 95W

11.2Replacing the processor heat sink

Field Replaceable Units (FRU)

Average task duration: 15 minutes

11.2.1 Required tools

●Preliminary and concluding steps: tool-less

●Removing and installing the processor heat sink:

– Phillips PH2 / (+) No. 2 screw driver

11.2.2 Preliminary steps

Before replacing the processor heat sink, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

188 Upgrade and Maintenance Manual MX130 S2