Fujitsu MX130 S2 manual Removing ODD out of 5.25-inch chassis bay, Required tools

HDDs and accessible drives

7.14Removing ODD out of 5.25-inch chassis bay

7.14.1 Required tools

●Preliminary and concluding steps: tool-less

●Installing an ODD: tool-less

7.14.2 Preliminary steps

Before removing an ODD, perform the following steps:

ÊDisable BitLocker functionality as described in section "Disabling BitLocker functionality" on page 59.

ÊRemove all backup and optical disk media from backup and optical disk drives as described in section "Removing backup and optical disk media" on page 60.

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊOpen the front cage as described in section "Opening the front cage" on page 52.

ÊLocate the correct drive bay as described in section "Mounting order" on page 82.

118 Upgrade and Maintenance Manual MX130 S2