Main memory

Figure 115: Installing memory modules (B)

ÊAlign the notch on the bottom of the module with the crossbar in the connector.

ÊPress down on the memory module until the securing clips snap into the cutouts at each end of the module.

10.2.4 Concluding steps

Perform the following procedures to complete the task:

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊIf available, update the system board BIOS to the latest version as described in section "Updating the system board BIOS" on page 62.

ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task, re-enable BitLocker as described in section "Enabling BitLocker functionality" on page 66.

MX130 S2

Upgrade and Maintenance Manual

183

Page 183
Image 183
Fujitsu MX130 S2 manual Upgrade and Maintenance Manual 183