Upgrade and Maintenance Manual 107 | Fujitsu MX130 S2 specification

Before installing a 3.5-inch HDD, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊOpen the front cage as described in section "Opening the front cage" on page 52.

ÊLocate the correct drive bay as described in section "Mounting order" on page 82.

7.10.3Removing an additional 3.5-inch HDD out of the 5.25-inch ODD/HDD bracket

Figure 46: Cabling of HDD and ODD in 5.25-inch ODD/HDD bracket

ÊDisconnect cables to the HDD.

1Power cable connector P2 (see "Power cable T26139-Y4012-V211" on page 239)

2SATA cable T26139-Y4028-V153

MX130 S2