8 System fan
Basic information
The PRIMERGY MX130 S2 server features one system fan module.
IAdditional fans in PSU and processor heat sink cannot be replaced individually.
VCAUTION!
Since the system fan is not redundant is has to be replaced immediately in case of defects or
Safety notes
VCAUTION!
●Do not damage or modify internal cables or devices. Doing so may cause a device failure, fire, or electric shock.
●Devices and components inside the server remain hot after shutdown. After shutting down the server, wait for hot components to cool down before installing or removing internal options.
●Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static
●Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.
●If devices are installed or disassembled using methods other than those outlined in this chapter, the warranty will be invalidated.
●For further information, please refer to chapter "Important information" on page 31.
MX130 S2 | Upgrade and Maintenance Manual | 145 |
