HDDs and accessible drives

7.4Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay

Upgrade and Repair Units (URU)

Average task duration: 5 minutes

7.4.1Required tools

Preliminary and concluding steps: tool-less

Removing a 3.5-inch HDD: tool-less

7.4.2Preliminary steps

Before removing a 3.5-inch HDD, perform the following steps:

ÊEnsure that the HDD to be removed is not combined into a RAID array. If the drive is part of a RAID array, you first need to delete the array using ServerView RAID Manager.

VCAUTION!

All data on all HDDs in the array will be lost! Be sure to back up your data before deleting a RAID array.

IFor further information, please refer to the "ServerView Suite RAID Management" user guide, available online at http://manuals.ts.fujitsu.com or from the ServerView Suite DVD 2 supplied with your PRIMERGY server.

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊOpen the front cage as described in section "Opening the front cage" on page 52.

88

Upgrade and Maintenance Manual

MX130 S2

Page 88
Image 88
Fujitsu MX130 S2 manual Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay