Fujitsu MX130 S2 manual Removing additional 3.5-inch HDD out of 3.5-inch chassis bay

HDDs and accessible drives

7.6Removing additional 3.5-inch HDD out of 3.5-inch chassis bay

7.6.1Required tools

●Preliminary and concluding steps: tool-less

●Installing a 3.5-inch HDD

– Phillips PH2 / (+) No. 2 screw driver

7.6.2Preliminary steps

Before installing a 3.5-inch HDD, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊOpen the front cage as described in section "Opening the front cage" on page 52.

ÊLocate the correct drive bay as described in section "Mounting order" on page 82.

94 Upgrade and Maintenance Manual MX130 S2