10 Main memory

Safety notes

VCAUTION!

Do not install unsupported third party memory modules. For further information on supported memory modules, refer to section "Basic procedure" on page 180.

Memory modules remain hot after shutdown. Wait for components to cool down before installing or removing memory modules to prevent burns.

Do not insert and remove memory modules repeatedly. Doing so may cause failures.

Pressing out the securing clips on the memory module connector will eject the installed memory module. To prevent damage and injuries eject memory modules carefully without applying excessive force.

For further information, please refer to chapter "Important information" on page 31.

In this chapter

"Memory sequence" on page 180

"Operation modes" on page 181

"Installing memory modules" on page 182

"Removing memory modules" on page 184

MX130 S2

Upgrade and Maintenance Manual

179

Page 179
Image 179
Fujitsu MX130 S2 manual Main memory, Safety notes