Fujitsu MX130 S2 manual HDDs and accessible drives, This chapter

HDDs and accessible drives

●Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.

●Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static build-up (e.g. by touching a grounded object) before handling electrostatic- sensitive devices (ESDs).

●For further safety information, please refer to chapter "Important information" on page 31.

In this chapter

●"Mounting order" on page 82

– 3.5-inch HDD subsystem

●"Installing 3.5-inch HDD in HDD1 / HDD2 chassis bay" on page 83

●"Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay" on page 88

●"Installing additional 3.5-inch HDD in 3.5-inch chassis bay" on page 91

●"Removing additional 3.5-inch HDD out of 3.5-inch chassis bay" on page 94

●"Installing additional 3.5-inch HDD in 5.25-inch dummy cover" on page 97

●"Removing 3.5-inch HDD out of 5.25-inch dummy cover" on page 100

●"Installing additional 3.5-inch HDD in 5.25-inch ODD/HDD bracket" on page 103

●"Removing 3.5-inch HDD out of 5.25-inch ODD/HDD bracket" on page 106

– 2.5-inch HDD subsystem

I2.5-inch SATA HDDs available on project request in EMEA market only.

●"Installing 5.25-inch dummy cover" on page 110

●"Removing 5.25-inch dummy cover" on page 112

●"Installing ODD in 5.25-inch chassis bay" on page 115

●"Removing ODD out of 5.25-inch chassis bay" on page 118

●"Installing slimline ODD in 5.25-inch ODD/HDD bracket" on page 121

●"Removing slimline ODD out of 5.25-inch ODD/HDD bracket" on page 125

80 Upgrade and Maintenance Manual MX130 S2