
HDDs and accessible drives
ÊDisconnect cables to the ODD.
3 Power cable connector P4 (see "Power cable
4 SATA cable
ÊClose the front cage as described in section "Closing the front cage" on page 53.
Figure 47: Removing the 5.25-inch ODD/HDD bracket
ÊPush the green handle backward (1) and pull the ODD/HDD bracket out of its bay (2).
VCAUTION!
Always replace dummy modules into unused drive bays to comply with applicable EMC regulations and satisfy cooling requirements.
108 | Upgrade and Maintenance Manual | MX130 S2 |