System board and components

ÊRemove eight screws from the system board (see circles) beginning with the two centering bolts (C).

Figure 136: Detaching the system board (B)

VCAUTION!

Do not lift or handle the system board by any of its heat sinks!

Ensure not to damage the EMI springs to comply with applicable EMC regulations and satisfy cooling requirements and fire protection measures.

ÊHold the defective system board by the memory module ejectors and a PCI slot and shift the system board to the right until the plug shells disengage from the cut-outs in the connector panel and lift it out of the chassis.

ÊIf applicable, remove the TPM board as described in section "Trusted Platform Module (TPM)" on page 204.

ÊRemove the processor heat sink and the processor as described in section "Replacing the processor" on page 191.

216

Upgrade and Maintenance Manual

MX130 S2

Page 216
Image 216
Fujitsu MX130 S2 manual Detaching the system board B