HDDs and accessible drives

ÊConnect cables to the HDD.

1Power cable connector P2 (see "Power cable T26139-Y4012-V211" on page 239)

2SATA cable T26139-Y4028-V153

7.7.4Concluding steps

Perform the following procedures to complete the task:

ÊClose the front cage as described in section "Closing the front cage" on page 53.

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊPlease observe the notes on RAID rebuild in section "Performing a RAID array rebuild" on page 67.

7.8Removing 3.5-inch HDD out of 5.25-inch dummy cover

7.8.1Required tools

Preliminary and concluding steps: tool-less

Installing a 3.5-inch HDD

– Phillips PH2 / (+) No. 2 screw driver

7.8.2Preliminary steps

Before removing a 3.5-inch HDD, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊOpen the front cage as described in section "Opening the front cage" on page 52.

ÊLocate the correct drive bay as described in section "Mounting order" on page 82.

100

Upgrade and Maintenance Manual

MX130 S2

Page 100
Image 100
Fujitsu MX130 S2 manual Removing 3.5-inch HDD out of 5.25-inch dummy cover, Concluding steps