Basic hardware procedures
4.5Closing the server
VCAUTION!
●Before attaching the covers, make sure no unnecessary parts or tools are left inside the server.
●In order to comply with applicable EMC regulations (regulations on electromagnetic compatibility) and satisfy cooling requirements, the PRIMERGY MX130 S2 server must not run while the server cover is removed.
●For further safety information, please refer to chapter "Important information" on page 31.
4.5.1Mounting the server cover
Figure 9: Mounting the server cover
ÊFit the server cover on the chassis.
54 | Upgrade and Maintenance Manual | MX130 S2 |
