Fujitsu MX130 S2 manual Powercfg -h on Configuration, Execution

Important information

The system has a hibernate mode (S4 mode) from which it can be woken up via WOL (Wake-up On LAN). In order to use this feature, however, the S4 mode must be activated/enabled in the corresponding operating system installed.

The following description is an example and can only serve as a guide for other operating systems.

To bring your system into S4 mode (= hibernate mode), proceed as follows:

Operating system Microsoft Windows 2008 Enterprise Edition

Activation

ÊOpen the command line tool using C:\Windows\System32\cmd.exe and enter the following command to activate S4 mode:

powercfg -h ON

Configuration

To set the driver for the internal LAN controller:

ÊOpen the Device Manager via Start - Control Panel - System - Device Manager.

ÊSelect Network Adapters.

ÊSelect the internal LAN controller: Broadcom Netlink™ Gigabit Ethernet.

ÊSelect Properties in the overview, and then select Power Management.

ÊIn the Wake on LAN field, enable the following option:

– Allow this device to wake the server.

ÊPress OK.

Execution

To execute the power down command in a DOS shell:

Using the shutdown -hcommand, your system saves all user data (e.g: open windows and running programs), shuts down the system, and transfers it to S4 mode.

40 Upgrade and Maintenance Manual MX130 S2