HDDs and accessible drives
Figure 32: Connecting the cables to the HDD
ÊConnect cables to the HDD.
1Power cable connector P3 (see "Power cable
2SATA cable
7.5.4Concluding steps
Perform the following procedures to complete the task:
ÊClose the front cage as described in section "Closing the front cage" on page 53.
ÊFollow all procedures described in section "Closing the server" on page 54.
ÊPlease observe the notes on RAID rebuild in section "Performing a RAID array rebuild" on page 67.
MX130 S2 | Upgrade and Maintenance Manual | 93 |