11 Processors
Safety notes
VCAUTION!
●Do not install unsupported processors. For further information on supported processors, refer to section "Basic procedure" on page 188.
●Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static
●Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.
●When removing or installing the processor, be careful not to touch or bend the processor pins.
●For further information, please refer to chapter "Important information" on page 31.
In this chapter
●"Supported processors" on page 188
●"Replacing the processor heat sink" on page 188
●"Replacing the processor" on page 191
MX130 S2 | Upgrade and Maintenance Manual | 187 |
