
Expansion cards
9.2.3.4Connecting cable of the eSATA cable to connector
Figure 104: Connecting the eSATA cable
ÊConnect the end of eSATA cable to the system board connector SATA6.
ÊFold the cable carefully as shown in the picture.
9.2.3.5Concluding steps
Perform the following procedures to complete the task:
ÊFollow all procedures described in section "Closing the server" on page 54.
9.2.4Removing eSATA cable
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
170 | Upgrade and Maintenance Manual | MX130 S2 |