Fujitsu MX130 S2 manual Removing 3.5-inch HDD out of 5.25-inch ODD/HDD bracket, Concluding steps

HDDs and accessible drives

ÊConnect cables to the HDD.

1Power cable connector P2 (see "Power cable T26139-Y4012-V211" on page 239)

2SATA cable T26139-Y4028-V153

ÊConnect cables to the ODD.

3Power cable connector P4 (see "Power cable T26139-Y4012-V211" on page 239)

4SATA cable T26139-Y4028-V201

7.9.4Concluding steps

Perform the following procedures to complete the task:

ÊClose the front cage as described in section "Closing the front cage" on page 53.

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊPlease observe the notes on RAID rebuild in section "Performing a RAID array rebuild" on page 67.

7.10Removing 3.5-inch HDD out of 5.25-inch ODD/HDD bracket

7.10.1 Required tools

●Preliminary and concluding steps: tool-less

●Installing a 3.5-inch HDD

– Phillips PH2 / (+) No. 2 screw driver

106 Upgrade and Maintenance Manual MX130 S2