Fujitsu MX130 S2 manual Removing HH ODD

HDDs and accessible drives

Figure 57: Removing HH ODD

ÊPush the green handle backward (1) and pull the half-height ODD out of the bay (2).

ÊDisconnect the fixation plate from the HH ODD cage.

VCAUTION!

Always replace dummy modules into unused drive bays to comply with applicable EMC regulations and satisfy cooling requirements.

7.14.4 Concluding steps

Perform the following procedures to complete the task:

ÊInstall the 5.25-inch dummy cover as described in section "Installing 5.25- inch dummy cover" on page 110.

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task, re-enable BitLocker as described in section "Enabling BitLocker functionality" on page 66.

120 Upgrade and Maintenance Manual MX130 S2