
Main memory
Figure 116: Removing memory modules
ÊEject the desired memory module by pressing out the securing clips at each end of the memory module connector.
ÊRemove the ejected memory module.
10.3.4 Concluding steps
Perform the following procedures to complete the task:
ÊFollow all procedures described in section "Closing the server" on page 54.
ÊIf available, update the system board BIOS to the latest version as described in section "Updating the system board BIOS" on page 62.
ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task,
MX130 S2 | Upgrade and Maintenance Manual | 185 |