System board and components
ÊCarefully pry the depleted CMOS battery out of its socket.
ÊRemove the CMOS battery (2).
IDo not throw the CMOS battery into the trash can. Lithium batteries must be disposed of in accordance with local regulations concerning special waste.
12.1.4 Installing the CMOS battery
Figure 126: Installing the CMOS battery
ÊAt a slight angle, fit the new CMOS battery into its socket as shown (1).
VCAUTION!
Ensure to insert the CMOS battery with the positive pole (label side) facing up.
The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer (CR2032).
202 | Upgrade and Maintenance Manual | MX130 S2 |
