Cables
Figure 156: Connecting the power cable
ÊConnect all power cable connectors to the installed drives (1).
It depends on your configuration which drives are installed. For details refer to section "HDDs and accessible drives" on page 79.
ÊConnect the power cable connectors P5 and P6 to the installed HDDs (2).
For details refer to section "HDDs and accessible drives" on page 79 and "Power cabling" on page 235.
14.3.5 Concluding steps
Perform the following procedures to complete the task:
ÊFollow all procedures described in section "Closing the server" on page 54.
MX130 S2 | Upgrade and Maintenance Manual | 243 |
