System board and components

12.1.2 Preliminary steps

Before replacing the CMOS battery, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

12.1.3 Removing the CMOS battery

Figure 125: Removing the CMOS battery

ÊPress out on the locking spring to eject the depleted CMOS battery (1).

ÊIf the CMOS battery cannot be ejected this way, use a toothpick (recommended) or similar tool as a lever: Insert the toothpick between the battery and locking spring as shown.

VCAUTION!

Do not use sharp-edged tools like screw drivers as they may damage system board components when slipping.

MX130 S2

Upgrade and Maintenance Manual

201

Page 201
Image 201
Fujitsu MX130 S2 manual Removing the Cmos battery