Fujitsu MX130 S2 manual System board and components Preliminary steps

System board and components

12.2.2.2 Preliminary steps

Before removing the TPM board, perform the following steps:

ÊBefore removing the TPM board, it is necessary to remove BitLocker- protection from the computer and to decrypt the volume.

Ask the system administrator to turn off BitLocker-protection using the BitLocker setup wizard available either from the Control Panel or Windows Explorer:

ÊOpen Bitlocker Drive Encryption by clicking the Start button, clicking

Control Panel, clicking Security, and then clicking Bitlocker Drive Encryption.

IAdministrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

ÊTo turn off BitLocker and decrypt the volume, click Turn Off BitLocker, and then click Decrypt the volume.

IDecrypting the volume may be time-consuming. By decrypting the volume, all of the information stored on that computer is decrypted.

For further information on how to disable BitLocker drive encryption, please refer to the Microsoft Knowledge Base.

Fujitsu service partners will find additional information (also available in Japanese) on the Fujitsu Extranet web pages.

ÊDisable TPM in the system board BIOS. Proceed as follows:

Ê Switch on or restart your server.

Ê As soon as the startup screen appears, press the [F2] function key to enter the BIOS.

Ê Select the Advanced menu.

Ê Select the Trusted Computing submenu.

Ê Set the TPM Support and TPM State settings to Disabled.

Ê Save your changes and exit the BIOS.

IFor detailed information on how to access the BIOS and modify settings, refer to the "Description - BIOS Manual D3090 / D3091" available online at http://manuals.ts.fujitsu.com or from the ServerView Suite DVD 2 supplied with your PRIMERGY server.

210 Upgrade and Maintenance Manual MX130 S2