HDDs and accessible drives

Figure 72: Removing the backup drive

ÊPush the green handle backward (1) and pull the backup drive out of its bay (2).

VCAUTION!

Always replace dummy modules into unused drive bays to comply with applicable EMC regulations and satisfy cooling requirements.

7.18.4 Concluding steps

Perform the following procedures to complete the task:

ÊInstall the 5.25-inch dummy cover as described in section "Installing 5.25- inch dummy cover" on page 110.

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task, re-enable BitLocker as described in section "Enabling BitLocker functionality" on page 66.

MX130 S2

Upgrade and Maintenance Manual

135

Page 135
Image 135
Fujitsu MX130 S2 manual Upgrade and Maintenance Manual 135