C
HAPTER
T
WO
: I
NSTALLATION

2.6

IN S TA L L AT I O N
2
Connect an audio cable
between the AUDIOOUT-
PUT jack on the camcorder
and the AUDIO terminals
on the front of the TV.
3
Connect a video cable
between the VIDEOOUT-
PUT jack on the camcorder
and the VIDEOterminal on
the front of the TV.
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
Connecting a Camcorder

The front panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR

or Camcorder Tape” on page 3.11)

The audio-video cables shown here are usually included with a Camcorder. (If not, check

your local electronics store.)

Note: This figure shows the Standard connector-jack panel. The actual configuration for

your TV may be different.

Connecting a DVD Player (Option)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Note: For an explanation of Component video, see your DVD player's owner's manual.

1
Connect a set of audio
cables between the AUDIO
INPUT jacks on the TV and
the AUDIO OUT jacks on the
DVD player.
2
Connect a video cable
between the DVD-IN (Y, Pb,
Pr) jacks on the TV and the
DVD-OUT (Y, Pb, Pr) jacks
on the DVD player.