Samsung TXP1430F, TXP1634F, TXP2022 This terminal might be labeled ANT OUT, VHF OUT,or simply, OUT., This terminal might be labeled ANTIN, VHF IN, or simply, IN.

2.3 C HAPTER T WO : I NSTALLATION
IN S TA L L AT I O N
Connecting to a Cable Box that Descrambles A l lC h a n n e l s
1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
This terminal might be labeled
“ANT OUT,” “VHF OUT,”or simply,
“OUT.”
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
This terminal might be labeled
“ANTIN,” “VHF IN,” or simply,
“IN.”
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the INterminal on the
cable box.