14
Connecting to a Power Source
If you have access to a mains supply, using an SAC-41 (for both Charger and AC adapter)
allows the camera to be used for long periods of time.Plug the SAC-41 (for both Charger and
AC adapter) into the connection point (DC IN 4.2V) on the camera.
* Insert the rechargeable batteries when using an SAC-41 (for both Charger and AC adapter).
Using the SAC-41(for both Charger and AC adapter)
[Using the AC adapter with Cradle] [Using the AC adapter with Camera]
Important information about battery usage
When the camera is not used, turn off the camera power.
Do not use the non rechargeable batteries. It may cause an explosion.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
INFORMATION
You should use the rechargeable battery (SLB-1137) supplied with the camera. Do not use
the AC adapter and non rechargeable battery at the same time. It may cause an explosion.