43
LCD button
[Full Information Mode] [Basic Information Mode] [Power save mode]
You can check the recording status in the LCD monitor.
In any mode with the exception of VOICE RECORDING
mode, pressing the LCD button will change the display as
shown below.
Idle mode
- After selecting Save mode by pressing the LCD button,
and if the camera isn't operated during the specified
time(about 30 SEC.), the camera power will be idle
(LCD monitor : OFF, Button lamp : Blinking) automatically.
- To use the camera again, press any of the camera buttons except the power button.
- If there is no operation during the specified time, the camera power will be turned off
automatically to save battery life. Refer to page 85 for more information about the auto
power off function.
Pressing the
LCD button
Pressing the
LCD button
Pressing the LCD button
Full Inf. Mode Basic Inf. Mode Save Mode