78
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [Setup] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select [Printer] menu by pressing the UP/ DOWN button
and press the OK button.
Connecting the Camera to a Printer
Using the USB cable with Cradle : Connect the camera and the cradle. Connect the cradle to
a printers USB port with the supplied USB cable.
Using the USB cable with Camera :
Connect the camera to a printers USB port with the supplied USB cable.
If you selected [Computer] in Step 4, when you connect the camera to your printer, the
[Connecting Computer] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
Setup
Back:
Set : OK
Sound
USB Computer
Lamp Printer
NOR