LED TV

user manual

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the safety instructions below before installing and using the product.)

Getting Started
Accessories

yy Remote Control & Batteries (AAA x 2)

yy Warranty Card / Safety Guide (Not available in some locations)

yy Owner’s Instructions

yy Power Cord

Connections

yy For better picture and audio quality, connect to a digital device using an HDMI

yy PC/DVI AUDIO IN input is not supported.

cable.

yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.

yy The picture may not display normally (if at all) or the audio may not work if an

yy Connecting through the HDMI cable may not be supported depending on the PC.

external device that uses an older version of HDMI mode is connected to the TV.

yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does

If such a problem occurs, ask the manufacturer of the external device about the

not work.

HDMI version and, if out of date, request an upgrade.

yy For Set-top box connection using HDMI cable, we highly recommend you to

yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not

connect the HDMI IN 1 (STB) port.

display or a connection error may occur.

 

For India only

ATTENTION:

This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.

When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.

yy Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.

yy Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated energy consumption.

To reset the television to Star rating qualified settings, select ‘Home’ mode from

ForContactpersonalSAMSUNGand non-commercialWORLDuseWIDEonly.

UsageIf youishavesubjectanytoquestionsfollow ng theorguidelinescommentsin therelatingUser Manualto Samsungand may not be

availableproducts,in allpleaser gionscontact. the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

VIETNAM

1800 588 889

www.samsung.com/vn/support

THAILAND

0-2689-3232,

www.samsung.com/th/support

 

1800-29-3232

 

MYANMAR

+95-1-2399-888

www.samsung.com/th/support

CAMBODIA

+855-23-993232

 

LAOS

+856-214-17333

 

CAUTION

 

This symbol indicates that high voltage is present inside. It

 

 

is dangerous to make any kind of contact with any internal

RISK OF ELECTRIC SHOCK. DO NOT OPEN

 

part of this product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

 

This symbol indicates that important literature concerning

COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE-

 

operation and maintenance has been included with this

FER ALL SERVICING TO QUALIFIED PERSONNEL.

 

product.

 

 

 

yy Cable Holder(1EA)

Assembling the Cable Holder

 

Input Cables (Sold Separately)

 

 

 

 

yy HDMI-DVI

yy Composite (AV)

 

yy Coaxial (RF)

yy Component

 

yy HDMI

 

Audio connection

 

HDMI connection

(Analog)

 

 

Blu-ray player / DVD /

 

 

DVD / Home Theater

Set-top box

the initial set-up procedure in ‘factory settings’ under the ‘Set-up’ menu.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

yy Avoid displaying the same TV channel for long periods.

yy Always try to display any image on full screen, use TV set picture format menu for best possible match.

yy Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

yy Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

For India Only

MALAYSIA

1800-88-9999

www.samsung.com/my/support

 

603-77137477 (Overseas contact)

 

PHILIPPINES

1-800-10-726-7864 [ PLDT Toll Free ]

www.samsung.com/ph/support

 

1-800-8-726-7864 [ Globe Landline

 

 

and Mobile ]

 

 

02- 422-2111 [ Standard Landline ]

 

INDIA

1800 40 SAMSUNG (1800 40

www.samsung.com/in/support

 

7267864) (Toll-Free)

 

NEPAL

18000910113

www.samsung.com/support

BANGLADESH

0961-2300300

www.samsung.com/support

 

0800-0300300 (Toll Free)

 

SRI LANKA

0115900000

www.samsung.com/support

EGYPT

08000-7267864

www.samsung.com/eg/support

 

16580

 

ALGERIA

3004 (Toll Free)

www.samsung.com/n_

 

 

africa/support

IRAN

021-8255 [CE]

www.samsung.com/iran/support

SAUDI ARABIA

800 247 3457 (800 24/7 HELP)

www.samsung.com/sa/home

 

 

www.samsung.com/sa_en

PAKISTAN

0800-Samsung (72678)

www.samsung.com/pk/support

TUNISIA

80 1000 12

www.samsung.com/n_

 

 

africa/support

U.A.E

800-SAMSUNG (800 - 726 7864)

 

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,

 

and to protect it from overheating, these slots and openings must never be blocked or covered.

 

 

 

- Do not cover the slots and openings with a cloth or other materials.

 

 

 

 

- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

 

- Do not place this apparatus in a

space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

 

•

Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of

or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

 

swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• Make sure to pull out the power cord from the outlet before cleaning.

 

 

 

• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the

 

environment. Please contact your local authorities for disposal or recycling information.

 

 

•

Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in

or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular

 

attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and

 

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

•

Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

 

electrical supply. (depending on the model)

 

 

 

 

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

•

To avoid electric shock, never touch the inside of this apparatus. Only a

technician should open this apparatus.

TV Controller (Panel Key)

Selecting the Media Play

MEDIA.P

Selecting the Menu

 

m R s

 

Selecting a Source

 

 

PPower off

Return

Function menuRemote control sensor
TV Controller

The image is drawn by facing the front side of the TV.

USB

yyThe rear panel may differ depending on the model.

TV Rear Panel

Power Input

This product is RoHS compliant.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking on the product & accessories literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources House hold users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business user should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed other commercial wastes for disposal.

For more information on safe disposal and recycling visit our website www. samsung.com/in or contact our helpline number - 18002668282, 180030008282

 

 

www.samsung.com/ae/support

OMAN

800-SAMSUNG (800 - 726 7864)

(English)

KUWAIT

183-CALL (183-2255)

www.samsung.com/ae_ar/

BAHRAIN

8000-GSAM (8000-4726)

support (Arabic)

QATAR

800-CALL (800-2255)

 

JORDAN

0800-22273

 

 

06 5777444

www.samsung.com/levant/

SYRIA

962 5777444

support

LEBANON

961 1484 999

 

 

1299

 

MOROCCO

080 100 22 55

www.samsung.com/n_

 

 

africa/support

SOUTH AFRICA

0860 SAMSUNG (726 7864)

 

BOTSWANA

8007260000

 

NAMIBIA

08 197 267 864

 

ZAMBIA

0211 350370

www.samsung.com/support

MAURITIUS

800 2550

 

REUNION

0262 50 88 80

 

ANGOLA

940271635

 

MOZAMBIQUE

847267864 / 827267864

 

NIGERIA

0800-726-7864

www.samsung.com/africa_

GHANA

0800-100077

en/support

COTE D’ IVOIRE

8000 0077

www.samsung.com/africa_

SENEGAL

800-00-0077

fr/support

CAMEROON

67095-0077

 

KENYA

0800 545 545

 

UGANDA

0800 300 300

 

TANZANIA

0800 780 089

www.samsung.com/support

RWANDA

9999

BURUNDI

200

 

DRC

499999

 

SUDAN

1969

 

• Make sure to plug the power cord in until it is

inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not

touch the power cord with wet hands.

 

•If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

•Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

-Accumulated dust can cause an electric shock, an electric leakage, or aby causing the power cord to generate sparks and heat, or cause the insulation to deteriorate.

•Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage to your set.

•Use only a properly grounded plug and receptacle.

-An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible at all times.

•Do not allow children to hang onto the product.

•Store the accessories (batteries, etc.) in a location safely out of the reach of children.

•Do not install the product in an unstable location such as a shaky self, a slanted or a location exposed to vibration.

•Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

•To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

•Do not expose the apparatus to dripping or splashing.

•Do not dispose of batteries in a

•Do not short circuit, disassemble, or overheat the batteries.

•not short circuit, disassemble, or overheat the batteries.

•There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.

•WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

✎✎ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.

✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.

✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV. ✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)

VHF/UHF Antenna

or

Cable

Component connection

 

AV connection

 

 

 

Blu-ray player / DVD

 

VCR

-05

- 1 -

- 2 -

- 3 -

- 4 -

 

 

 

 

 

 

 

 

How to use Edit Name
Changing the Input Source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edit Name lets you associate a device name to an input source. To

 

 

 

 

 

 

 

 

Source List

access Edit Name, enter Support menu and select Edit Name. Name

 

 

 

 

 

 

 

 

the device connected to the input jacks to make your input source

Use to select TV or other external input sources such as DVD / Blu-ray

selection easier.

players / cable box / STB satellite receiver connected to the TV.

✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you

1. Press the SOURCE button.

 

should set the TV to PC mode under Edit Name.

2. Select a desired external input source.

 

✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI

 

 

 

 

 

 

 

 

■■TV / AV / Component / HDMI1

 

cable, you should set the TV to DVI PC mode under Edit Name.

✎✎ You can only choose external devices that are connected to the TV. In the

✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI

Source List, connected inputs will be highlighted.

to DVI cable, you should set the TV to DVI mode under Edit Name.

 

 

 

Information

 

 

Press INFO(I), you can see detailed information about the selected

 

external device.

 

✎✎ Information only available for the current connected source.

Remote Control

✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

 

Displays and selects the available video

Turns the TV on and off.

sources.

 

Press to directly access to channels.

 

Alternately select Teletext ON, Double, Mix or OFF.

Returns to the previous channel.

 

Cuts off the sound temporarily.

Adjusts the volume.

 

 

Changes channels.

Displays the channel list on the screen.

Displays the main on-screen menu.

 

Views the Media Play.

Selects the HDMI mode directly.

Quickly select frequently used functions.

Displays information on the TV screen.

Selects the on-screen menu items and changes the

 

values seen on the menu.

 

Returns to the previous menu.

Exit the menu.

 

Use these buttons according to the direction on

P.MODE: Selects the Picture Mode.

screen.

 

P.SIZE: Change the picture size.

Use these buttons in a specific feature.

SRS: Turns the DTS TruSurround on or off.

 

Display Modes (HDMI/DVI Input)

Optimal resolution

4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz

Mode

Resolution

Horizontal Frequency

Vertical Frequency (Hz)

Pixel Clock Frequency

Sync Polarity (H / V)

1366 x 768

1920 x 1080

(KHz)

(MHz)

 

 

 

 

 

 

IBM

720 x 400

31.469

70.087

28.322

-/+

c

c

 

 

 

 

 

 

 

 

 

640 x 480

35.000

66.667

30.240

-/-

c

c

 

 

 

 

 

 

 

 

MAC

832 x 624

49.726

74.551

57.284

-/-

c

c

 

 

 

 

 

 

 

 

 

1152 x 870

68.681

75.062

100.000

-/-

 

c

 

 

 

 

 

 

 

 

 

640 x 480

31.469

59.940

25.175

-/-

c

c

 

 

 

 

 

 

 

 

 

640 x 480

37.861

72.809

31.500

-/-

c

c

 

 

 

 

 

 

 

 

 

640 x 480

37.500

75.000

31.500

-/-

c

c

 

 

 

 

 

 

 

 

 

800 x 600

37.879

60.317

40.000

+/+

c

c

 

 

 

 

 

 

 

 

 

800 x 600

48.077

72.188

50.000

+/+

c

c

 

 

 

 

 

 

 

 

 

800 x 600

46.875

75.000

49.500

+/+

c

c

 

 

 

 

 

 

 

 

 

1024 x 768

48.363

60.004

65.000

-/-

c

c

 

 

 

 

 

 

 

 

 

1024 x 768

56.476

70.069

75.000

-/-

c

c

 

 

 

 

 

 

 

 

 

1024 x 768

60.023

75.029

78.750

+/+

c

c

VESA

 

 

 

 

 

 

 

1152 x 864

67.500

75.000

108.000

+/+

 

c

DMT

 

 

 

 

 

 

 

 

 

1280 x 720

45.000

60.000

74.250

+/+

c

c

 

 

 

 

 

 

 

 

 

1280 x 800

49.702

59.810

83.500

-/+

 

c

 

 

 

 

 

 

 

 

 

1280 x 1024

63.981

60.020

108.000

+/+

 

c

 

 

 

 

 

 

 

 

 

1280 x 1024

79.976

75.025

135.000

+/+

 

c

 

 

 

 

 

 

 

 

 

1366 x 768

47.712

59.790

85.500

+/+

c

c

 

 

 

 

 

 

 

 

 

1440 x 900

55.935

59.887

106.500

-/+

 

c

 

 

 

 

 

 

 

 

 

1600 x 900RB

60.000

60.000

108.000

+/+

 

c

 

 

 

 

 

 

 

 

 

1680 x 1050

65.290

59.954

146.250

-/+

 

c

 

 

 

 

 

 

 

 

 

1920 x 1080

67.500

60.000

148.500

+/+

 

c

 

 

 

 

 

 

 

 

Installing batteries (Battery size: AAA)

✎✎ NOTE

xxUse the remote control within 23 feet from TV.

xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. xxThe Colour and shape may vary depending on the model.

Channel Menu
❑❑ Seeing Channels
Channel List

Select a channel in the All Channels, Added Channels screen by pressing the ▲/▼ buttons, and pressing the ENTEREbutton. Then you can watch the selected channel.

✎✎ Using the remote control buttons with the Channel List.

Channel Status Display iconsIconsOperationsA channel deleted.
❑❑ Retuning Channels
Area
You can change the desired area.
Auto Store
(Depending on the country)Scans for a channel automatically and stores in the TV.
Manual Store
Scans for a channel manually and stores in the TV.

✎✎ According to channel source, Manual Store may be supported.

✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there is abnormal sound or no sound, reselect the sound standard required.

Channel List Option Menu

Set each channel using the Channel List menu options (Add / Delete). Option menu items may differ depending on the channel status.

Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.

■■Add / Delete: Delete or add a channel to display the channels you want.

✎✎ All deleted channels will be shown on the All Channels menu. ✎✎ A “” beside the channel indicates the channel has been deleted. ✎✎ The Add menu only appears for deleted channels.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.

✎✎ Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎✎ This is available for analogue broadcasts only.

Picture Menu
Picture Mode t
Select your preferred picture type.■■Dynamic: Suitable for a bright room.■■Standard: Suitable for a normal environment.■■Movie: Suitable for watching movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.

✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not available.

✎✎ When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness.

✎✎ Settings can be adjusted and stored for each external device connected to the TV.

✎✎ Lowering picture brightness reduces power consumption.

Picture Options
■■Colour Tone: Select the colour temperature

✎✎ Warm will be deactivated when the picture mode is Dynamic.

■■Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.4:3: Sets the picture to basic (4:3) mode.Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen size.

✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI(720p/1080i/1080p) signals are inputted.

✎✎ NOTE

xxDepending on the input source, the picture size options may vary. xxThe available items may differ depending on the selected mode.

xxSettings can be adjusted and stored for each external device connected to an input on the TV.

■■Digital Clean View: (Auto / Off / Low / Medium / High) If the broadcast signal received by your TV is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen.

✎✎ When the signal is weak, try other options until the best picture is displayed.

■■HDMI Black Level: Selects the black level on the screen to adjust the screen depth.

✎✎ Available only in HDMI mode (RGB signals).

■■Film Mode : (Auto / Off) Sets the TV to automatically sense and

process film signals from all sources and adjust the picture for optimum quality.

✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■Motion Lighting: Reduce power consumption by brightness control adapted motion.

✎✎ Only available in Standard mode.

Picture Reset
Resets your current picture mode to its default settings.

■■Reset Picture Mode : Returns all picture values in the currently.

Sound Menu
Sound Mode t
■■Standard: Selects the normal sound mode.■■Music: Emphasizes music over voices.■■Movie: Provides the best sound for movies.■■Clear Voice: Emphasizes voices over other sounds.
Equalizer
(standard sound mode only)

■■Balance: Adjusts the balance between the right and left speaker.

■■100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■Reset: Resets the Equalizer to its default settings.
DTS TruSurround t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

Auto Volume

Because each broadcasting station has its own signal conditions, the volume may fluctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker, both the TV’s speakers and the external speakers are on. You will hear sound through both.

✎✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

✎✎ If there is no video signal, both speakers will be mute.

Sound Reset
■■Reset All: Reset all sound settings to the factory defaults.Selecting the Sound Mode t

When you set to Dual I - Dual II, the current sound mode is displayed on the screen.

 

Audio Type

Dual I-II

Default

 

Mono

Mono

Automatic

A2 Stereo

Stereo

Stereo ↔ Mono

change

 

Dual

Dual I ↔ Dual II

Dual I

 

Mono

Mono

Automatic

NICAM

Stereo

Mono ↔ Stereo

change

Stereo

Dual

Mono ↔ Dual I

Dual I

 

Dual II

 

 

 

✎✎ If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.

✎✎ Only activated in stereo sound signal.

✎✎ This function is available for all input sources.

- 5 -

- 6 -

- 7 -

- 8 -