Samsung UA48H4203ARXZN, UA46H6203ARXZN, UA46H5303ARXUM, UA40H5303ARXUM manual Network Configuration

2.Select Stop when the TV attempts to connect to the network. Once the network connection has been interrupted, select IP Settings.

Network Configuration

Connection verification cancelled.

Wired network connection test stopped.
Change Network	IP Settings	Retry	Close

3.In the IP Settings screen, set the IP setting to Enter manually, enter the IP Address, Subnet Mask, Gateway, and DNS Server values, and then select OK.

●Use one of the following methods to enter the numerical values.

Set the numbers using the u and d buttons. Enter the numbers directly using numerical button.

	IP Settings
IP setting	Enter manually
IP Address	0.0.0.0
Subnet Mask	0.0.0.0
Gateway	0.0.0.0
DNS setting	Enter manually
DNS Server	0.0.0.0
OK	Cancel

4.The TV attempts to connect to the network again using the specified settings. A confirmation message appears once a connection is established. Select OK.

"The network connection speed may differ depending on the DNS server settings.

"For details on the DNS server settings, contact your Internet service provider (ISP).