Using Anynet+ (HDMI-CEC)
Control the external devices connected via Anynet+
You can use the TV's remote control to control external devices that are connected to the TV by an HDMI cable and that support Anynet+
Connecting an external device through Anynet+ and using their menus
Settings System Expert Settings Anynet+
1.Set Anynet+
2.Connect an HDMI-CEC-compliant device to the TV.
3.Turn on the connected external device. Then the device is automatically connected to the TV. After connection is finished, you can use the menus of the connected device by using your remote control.
Read before connecting an Anynet+ (HDMI-CEC)
"" Anynet+ cannot be used to control external devices that do not support
"" Anynet+ devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may not support Anynet+
"" The TV remote control may not work under certain circumstances. If this occurs, select the Anynet+ device again.
"" Anynet+
"" Anynet+
"" To listen to