Samsung UD55C, UD46C user manual 129, Lamp Schedule, OSD Display, Power On Adjustment, Repeat Mode

General

Sound Feedback	Low
Auto Power	Off
Standby Control	Auto
Lamp Schedule	Off
OSD Display
Power On Adjustment	0 sec
Repeat Mode

-- The displayed image may differ depending on the model.

Lamp Schedule

Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.

•• Off / On

OSD Display

Displays or hides a menu item on the screen. ――Source OSD / No Signal OSD / MDC OSD

Power On Adjustment

You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) ――A warm-up time that is too short may damage the product due to overvoltage.

Repeat Mode

Protects the product by detecting the fan speed and internal temperature.

•• Fan Control

Selects auto or manual for the fan speed settings.

--Auto

--Manual

•• Fan Speed Setting

Sets the fan speed within a range of 0 and 100. ――Enabled when Fan Control is set to Manual.

•• Temperature Control

Detects the product's internal temperature and specifies the desired temperature. The product is set to 77 C by default.

――The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power off to prevent overheating if the temperature keeps rising.

――It is best to use the product at temperatures 75 - 80 C (based on ambient temperature of 40 C).

129