Samsung UD46CB, UD55C-B, UD46C-B Source AutoSwitch Settings, Primary Source Recovery

Source AutoSwitch Settings

Source AutoSwitchi Settingsi
Source AutoSwitch		: On
		Off
Primary Source Recovery		: On
Primary Source	:	DVI
Secondary Source	:	PC

Move Enter Return

-- The displayed image may differ depending on the model.

--Source AutoSwitch Settings is disabled if PIP is set to On.

Primary Source Recovery

Source AutoSwitchi Settingsi
Source AutoSwitch		: On
		: Offn
Primary Source Recovery
Primary Source	:	On
Secondary Source	:	PC

Move Enter Return

-- The displayed image may differ depending on the model.

Source AutoSwitch

When the Source AutoSwitch is On, the display video source will automatically be searched for active video.

The Primary Source selection will be activated, if the current video source is not recognized. Secondary Source selection will become active, if no primary video source is available. If the primary or secondary source is not recognized, the display will search again, if no active video is found the display will show the no-input-signal message.

When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking for an active video source, returning back to the first video source in the sequence if no video is found.

•• Off / On

――Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On, the PIP function will not work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work.

――When the Source AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode becomes inactive.

――When Primary Source Recovery is On, only the Primary Source and Secondary Source selection are available and they are interchangeable and selectable at will. Refer to PIP > Source for compatible signals for each primary input source.

When Primary Source Recovery is On, only the Primary Source and Secondary Source video source selection will be searched for active video.

The Primary Source will be selected if active video is found, if no video is found, the Secondary Source will be selected, if no video is found in Secondary Source again, the no-input-signal is displayed.

•• Off / On

61