Pelco DD53CBW-X manual Advanced Camera Settings, Shutter Speed, AGC Limit, Numeric Value

Advanced Camera Settings

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

CAMERA

TYPE OF LIGHTING	OUTDOOR
AUTO FOCUS	ON
ZOOM LIMIT	X184
ZOOM SPEED	MEDIUM
LOW LIGHT LIMIT	2
IR CUT FILTER	AUTO
AUTO IR LEVEL	DUSK
<ADVANCED SETTINGS>
BACK
EXIT

ADVANCED SETTINGS

SHUTTER SPEED	AUTO
AGC LIMIT	28
AUTO IRIS	AUTO
AUTO IRIS LEVEL	66
AUTO IRIS PEAK	8
AUTO SHARPNESS	ON
SHARPNESS LEVEL	26
AUTO WHITE BALANCE	ON
R GAIN	482
B GAIN	678
BACKLIGHT COMP	OFF
VIDEO LEVEL	HIGH
WIDE DYNAMIC RANGE	OFF
BACK
EXIT

SHUTTER SPEED

Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value).

AUTO (default)	The electronic shutter speed is set automatically by the amount of
	light sensed by the camera.
NUMERIC VALUE	Spectra III SE dome system has several numerical shutter speed
	settings. The higher the number, the faster the electronic shutter.
	The slowest shutter speed setting is 2 = 1/2 second
	The fastest setting is 30,000 = 1/30,000 second
	Increasing the shutter speed lowers the light sensitivity and
	reduces the streaking of fast moving objects.

NOTE: Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will eliminate any flicker that may occur in the picture.

AGC LIMIT

AGC Limit allows users to adjust how the system balances AGC (automatic gain control) and electronic shutter in low light conditions. As scene lighting decreases, the system will automatically adjust, adding a mixture of AGC and slow shutter according to the AGC LIMIT setting. AGC LIMIT can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast, setting AGC LIMIT to 0 will force the system software to apply maximum slow shutter (as defined by the LOW LIGHT LIMIT setting) before any AGC is applied. The default setting of 28 sets the AGC and slow shutter balance to favor AGC, yielding more real-time low light images.

NOTE: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to the Low Light Limit section).

*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.

20 C2445M-E (11/05)