![Clear](/images/new-backgrounds/37178/3717895x1.webp)
Clear
SPECTRA III
LANGUAGEENGLISH
Use this setting to clear
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
CLEAR
CLEAR ALL ZONES CLEAR ALL PRESETS CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
The following are the available CLEAR settings:
ALL ZONES | Clears all zones. To clear a single zone, refer to the Zones |
| section. |
ALL PRESETS | Clears all presets. To clear a single preset, refer to the |
| Presets section. |
ALL PATTERNS | Clears all patterns. To clear a single patterns, refer to the |
| Patterns section. |
ALL WINDOW BLANKING | Clears all blanked windows. To clear a single blanked |
| window, refer to the Window Blanking section. |
RESTORE FACTORY DEFAULTS | Restores all camera settings to factory default settings. |
*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.
48 |