SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP>
<DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
VIDEO LEVEL
Set the video output to one of the following:
NORMAL | 1.0 volt |
HIGH (default setting) | 1.2 volt |
WIDE DYNAMIC RANGE
The Wide Dynamic Range (WDR) setting balances the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and provides more detail. The range from the darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF.
Avaliable settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.
CAMERA
TYPE OF LIGHTING | OUTDOOR |
AUTO FOCUS | ON |
ZOOM LIMIT | X184 |
ZOOM SPEED | MEDIUM |
LOW LIGHT LIMIT | 2 |
IR CUT FILTER | AUTO |
AUTO IR LEVEL | DUSK |
|
|
<ADVANCED SETTINGS> |
|
BACK |
|
EXIT |
|
ADVANCED SETTINGS
SHUTTER SPEED | AUTO |
AGC LIMIT | 28 |
AUTO IRIS | AUTO |
AUTO IRIS LEVEL | 66 |
AUTO IRIS PEAK | 8 |
AUTO SHARPNESS | ON |
SHARPNESS LEVEL | 26 |
AUTO WHITE BALANCE | ON |
R GAIN | 482 |
B GAIN | 678 |
BACKLIGHT COMP | OFF |
VIDEO LEVEL | HIGH |
WIDE DYNAMIC RANGE | OFF |
BACK |
|
EXIT |
|
Wide Dynamic Range ON | Wide Dynamic Range OFF |
*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.
24 |
