Pelco DD53CBW-X manual Presets, Action

Presets

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

The Spectra III SE dome system has 150 preset positions. Each of the user-definable presets can be programmed to use pan, tilt, camera settings, and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150.

The following presets are predefined for specific functions:

Preset	Action
33	Flip command. Pans the dome drive 180 degrees.

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

PRESETS

PRESET NUMBER	1
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION	-
AZIMUTH
ELEVATION	-
ZOOM RATIO	-
CUSTOM CAMERA SETTINGS	-

*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.

34	Pan zero command. Directs the dome drive to the factory-
	determined zero reference point.
83-87	Reserved.
88	IR filter IN (color).
89	IR filter OUT (black-white).
90-91	Manual limit stops.
92-93	Scan limit stops.
94	Reserved.
95	Select main programming menu.
96	Stop a scan.
97	Random scanning.
98	Frame scanning.
99	Start auto scanning

Use the following steps to program a preset.

1.Select the preset number:

a.Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open. The cursor moves to the right.

b.Move the joystick up or down to view selections. Press Iris Open to enter selection.

2.Edit the preset label:

a.Use the joystick to position the cursor beside EDIT PRESET LABEL.

b.Press Iris Open. The following appears on the monitor:

LABEL FOR ZONE
ZONE NUMBER ------	OK
1234567890
ABCDEFGHIJ	CANCEL
KLMNOPQRST
UVWXYZ.,-/	SPACE
abcdefghij	BACKSPACE
klmnopqrst
uvwxyz#&:*

c.Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.

d.When label is completed, move the cursor to OK. Press Iris Open to return to the Preset menu.

32 C2445M-E (11/05)