Issues

Solutions and Explanations

 

 

 

 

 

 

 

The message

●●

If you are using a CAM CARD (CI/CI+), check that it is

 

 

“Scramble signal”

 

installed into the common interface slot.

 

 

or “Weak Signal/No

●●

If there is still a problem, pull the CAM CARD out of the

 

 

Signal” appears.

 

 

 

TV and insert it into the slot again.

 

 

 

 

 

 

 

 

 

 

 

There are recurrent

●●

Check and change the signal/source.

 

 

picture/sound issues.

 

 

 

 

 

 

 

 

◀

A reaction may occur

●●

To prevent this, use felt pads on any surface of the TV

▶

between the rubber

 

that comes in direct contact with furniture.

 

cushion pads on the

 

 

 

 

base stand and the

 

 

 

 

top finish of some

 

 

 

 

furniture.

 

 

 

 

 

 

 

 

English