Samsung UE40B8000 Setup Menu, Menu Language, Time Clock, Sleep Timer, Timer 1 / Timer 2 / Timer

32

English Using the Menus

Setup Menu

	Setup
Option	Description
Menu Language	You can set the menu language.
Time	❑ Clock

Setting the clock is necessary in order to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again.

■Clock Mode

You can set up the current time manually or automatically.

•Auto: Set the current time automatically using the time from the digital broadcast.

•Manual: Set the current time to a manually specified time.

■Clock Set

You can set the current time manually.

•This function is only available when Clock Mode is set to Manual.

•You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.

❑Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).

■To cancel the Sleep Timer function, select Off.

❑Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made.

You must set the clock first.

■On Time

Set the hour, minute, and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to Activate.)

■Off Time

Set the hour, minute, and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to Activate.)

■Volume

Set the desired volume level.

■Source → TV / USB

You can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.)

■Antenna (when Source is set to TV) Select ATV or DTV.

■Channel (when Source is set to TV) Select the desired channel.

■Contents (when Source is set to USB)

You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.

•If the folder name is too long, the folder cannot be selected.

•If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.

■Repeat

Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or

Manual.

•When Manual is selected, press the ► button to select the desired day of the week. Press the ENTEREbutton over the desired day and the cmark will appear.

•You can set the hour, minute and channel by pressing the number buttons on the remote control.

Plug & Play

Setup	Menu Language	: English	▶
	Time
	Broadcast
	Security
	Network
	General

■The current time will appear every time you press the INFO button.

■Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.

■The Antenna or cable must be connected in order to set the time automatically.

■Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.

Timer 1

On Time

00	00					Inactivate
Off Time
00	00					Inactivate
Volume	Source		Antenna			Channel
10		TV		ATV			0
Repeat	Sun Mon		Tue Wed		Thu Fri		Sat
Once
	LMove UAdjust EEnter						RReturn

■When there is only one photo file in the USB the Slide Show will not play.

■Auto Power Off

When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long

time.