Samsung UE40C9000ZWXXH manual Plug & Play Initial Setup

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the Red button.

01Started Getting

1	Turn on the TV and
	Touch Control.
2	Connect the
	Samsung Wireless
	LAN Adapter
3	languageSelecting a
4	Selecting Store
	Demo or
	Home Use
5	Selecting a country
6	antennaSelecting an
7	Selecting a channel
8	ModeSetting the Clock
9	Time Zone
10	Viewing the HD
	Connection Guide.
11	Enjoy your TV.

yy Turn on the Touch Control and then tap OK on your remote.

✎✎It may take about one minute to establish a wireless connection between the TV and Touch Control using the Samsung Wireless LAN Adapter.

yy Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung Wireless LAN Adapter using one of the methods shown on page 35.

yy If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try again. Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTEREbutton.

yy Select the Home Use mode. Store Demo mode is for retail environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate country.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air or Cable.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store (p. 18).

✎✎Press the ENTEREbutton at any time to interrupt the memorisation process. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTEREbutton.

Press the ▲ or ▼ button to select the your time zone, then press the ENTEREbutton. (depending on the country)

The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

English 11