How to use OSD Menu
❖Edit Pattern
①By using Joystick, move to start position with appropriate zoom. To start pattern recording, press NEAR or ENTER key. To exit this menu, press FAR key.
EDIT PATTERN 1
SCAN SETUP
SCAN SETUP
SCAN NO. 1
UNDEFINED
CLEAR SCAN CANCEL <EDIT SCAN>
MOVE TO START POSITION [NEAR:START/ FAR:CANCEL]
0/0/x1/N
②Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in a selected pattern. The total memory size and the rest memory size is displayed in the form of bar. Maximum 1,000 communication commands can be stored in a pattern.
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE] 0/0/X1/N
③To save data and exit, press NEAR or ENTER key. To cancel recording and delete record data, press FAR key.
BACK
EXIT
• Scan Number [1~8]
Selects Scan number to edit.
If a selected Scan number is not defi ned, “UNDEFINED” will be displayed under selected Scan number.
• Clear Scan | [CANCEL/OK] |
Deletes data in current Scan | |
• Edit Scan | Starts editing Scan. |
❖Edit Scan
①Press NEAR or ENTER key in “NO” list to start Scan setup.
EDIT SCAN | 1 |
NO. ACTION NO. DWELL OPT
1 NONE
2NONE
3NONE
4NONE
5NONE
SAVE
CANCEL [NEAR:EDIT]
②Note that MAX. 20 Functions are allowed in a Scan. Move cursor up/down and press NEAR or ENTER key to set up.
EDIT SCAN | 1 |
NO. ACTION NO. DWELL OPT
1 | NONE |
|
2 | NONE |
|
3 | NONE |
|
4 | NONE |
|
5 | NONE |
|
SAVE | [NEAR:EDIT ACT] | |
CANCEL | [FAR :EDIT END] | |
24 – 36x SMART DOME CAMERA
