Installation
❖RS-485 Termination Resistor
ON ON
1 2 3 4 5 6 7 8
•Pin 8 is used for ON/OFF of
– Pin 8
INSTALLATION USING MOUNT BRACKET
①Using the paper template, mark the holes on the wall.
③After locating the wall mount bracket on the anchor bolts properly. Tighten the nuts for anchor bolts
②After drilling the holes, fi x the four anchor bolts into the holes.
|
④Connect cables to terminal blocks and BNC in the inner box of junction box. See the cabling in the next section.
C onnector to the dom e cam era
Protocol,
Address DIP
ALAR M
P O W ER
B N C
VIDEO
