11
English

02 Connections

Changing the Input Source

Source List
Use to select TV or an external input
sources such as a DVD / Blu-ray player /
cable box / STB satellite receiver.
■TV / Ext.1 / Ext.2 / PC / AV /
Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
✎
In the Source List, connected
inputs will be highlighted.
✎
Ext.1, Ext.2 and PC always stay activated.
Edit Name
■VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) por t,
you should set to DVI PC mode under Edit Nam e.
✎
When connecting an HDMI/DVI ca ble to the HDMI
IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
yIf you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
yThe pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
yWhen the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.
✎
NOTE
x
You must obtain a “CI or CI+ CARD” from a local cable ser vice provider.
x
When removing the “CI or CI+ CARD”, carefully pull it o ut with your hands since droppi ng the “CI or CI+ CARD” may
cause damage to it.
x
Insert the “CI or CI+ CARD” in the direction m arked on the card.
x
The location of the COMMON INTERFACE slot m ay be different dependin g on the model.
x
“CI or CI+ CARD” is not supported in some coun tries and regions; check with yo ur authorized dealer.
x
If you have any problems, please contact a s ervice provider.
x
Insert the “CI or CI+ CARD” that suppor ts the current antenna settings. T he screen will be distorted or w ill not be
seen.
SOURCE
[UC8000]BN68-02697D-Eng.indb 11 2010-04-02 오후 7:54:49