22
English
Basic Features
Audio Language
(digital channels only)
Change the default value for audio languages.
✎
The available language may dif fer depending on the
broadcast.
Audio Format
(digital channels only)
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the TV Speaker function.
✎
Audio Format option may differ de pending on the
broadcast. 5.1ch Dolby digital sound is only available
when connecting an external s peaker through an
optical cable.
Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.
■Audio Description (Off / On): Turn
the audio description function on or
off.
■Volume: Adjust the audio description volume.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to Ex ternal Speaker, the
volume and MUTE buttons will not ope rate and the
sound settings will be limited.
✎
When Speaker Select is set to Ex ternal Speaker.
x
TV Speaker: Off, Externa l Speaker: On
✎
When Speaker Select is set to TV S peaker.
x
TV Speaker: On, External S peaker: On
✎
If there is no video signal, both speake rs will be mute.
Additional Setting
(digital channels only)
■DTV Audio Level (MPEG / HE-AAC): This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
✎
According to the type of broadcast sig nal, MPEG
/ HE-AAC can be adjusted betwee n -10dB and
0dB.
✎
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
■SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sou nd, and RF
to reduce the difference betwee n loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

¦Selecting the Sound Mode

t
When you set to Dual
f
-
g
, the current sound mode is
displayed on the screen.
Audio
Type Dual 1/2 Default
A2
Stereo
Mono Mono Automatic
change
Stereo Stereo ↔ Mono
Dual Dual
f
↔ Dual
g
Dual
f
NICAM
Stereo
Mono Mono Automatic
change
Stereo Mono ↔ Stereo
Dual Mono ↔ Dual
f
Dual
g
Dual
f

AD

[UC8000]BN68-02697D-Eng.indb 22 2010-04-02 오후 7:55:00