Samsung UE55B7000WWXXC manual Size, Screen Mode, Digital NR → Off / Low / Medium / High / Auto

26

English Using the Menus

		Picture
Option		Description
Picture Options	■ Size
	Changes the screen shape in terms of height and width.
	Also known as Aspect Ratio.
	•	Auto Wide: Enables the correct picture size to
	•	match the original video signal.
		16:9: Sets the picture aspect ratio to fill the screen.
	•	Wide Zoom: Enlarges the middle part of the
	•	picture.
		Zoom: Magnifies the picture contents horizontally
	•	and vertically.
		4:3: Sets the picture aspect ratio to 4:3 with black
	•	or gray side bars.
		Screen Fit: Matches every pixel of the original
		image to a pixel on the TV screen (aka 1:1 pixel
		mapping) to show the entire image.
		● Wide Zoom: Press the ► button to select
		Position, then press the ENTEREbutton.
		Press the ▲ or ▼ button to move the picture up /
		down. Then press the ENTEREbutton.
		● Zoom: Press the ► button to Select Position,
		then press the ENTEREbutton. Press the ▲ or
		▼ button to move the picture up and down. Then
		press the ENTEREbutton. Press the ► button
		to Select Size, then press the ENTEREbutton.
		Press the ▲ or ▼ button to magnify or reduce the
		picture size in the vertical direction. Then press the
		ENTEREbutton.
		● After selecting Screen Fit in HDMI (1080i / 1080p)
		or Component (1080i / 1080p) mode: Select
		Position by pressing the ◄ or ► button. Use the
		▲, ▼, ◄ or ► button to move the picture.
		Reset: Press the ◄ or ► button to select Reset,
		then press the ENTEREbutton. You can initialize
		the setting.
		● If you use the Screen Fit function with HDMI 720p
		input, 1 line will be cut at the top, bottom, left and
		right as in the Overscan function.
		● When Double (À, Œ) mode has been set in PIP,
		the Picture Size cannot be set.
	■ Screen Mode
	When setting the picture size to Auto Wide in a 16:9 wide
	TV, you can determine the picture size you want to see the
	4:3 WSS (Wide Screen Service) image or nothing. Each
	individual European country requires different picture size
	so this function is intended for users to select it.
	•	16:9: Sets the picture to 16:9 wide mode.
	•	Wide Zoom: Magnify the size of the picture more
	•	than 4:3.
		Zoom: Magnify the size of the picture vertically on
	•	screen.
		4:3: Sets the picture to 4:3 normal mode.
	■ Digital NR → Off / Low / Medium / High / Auto
	Can reduce the grain effect or level of video snow seen in
	images coming from poor quality sources.
	■ HDMI Black Level → Normal / Low
	Adjusts the black level in the picture according to the type
	of signal being transmitted through HDMI.
	■ Film Mode
	Applies the appropriate video processing needed to
	achieve the best picture quality for watching movies.
	•	Off: Turn the Film Mode function off.
	•	Auto1: Improves the picture quality for fast motion
	•	scenes.
		Auto2: Allows a smoother text motion on fast
		motion scenes.

■Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.

■Depending on the input source, the picture size options may vary.

■The items available may differ depending on the selected mode.

■In PC Mode, only 16:9 and 4:3 mode can be adjusted.

■Settings can be adjusted and stored for each external device you have connected to an input of the TV.

■Temporary image retention may occur when viewing a static image on the set for more than two hours.

■This function is available in Auto Wide mode.

■This function is not available in PC, Component or HDMI mode.

■This function is active only when an external device is connected to the TV via HDMI (RGB signals).

■Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).