Samsung UE40D6000TPXZT, UE55D6000TPXZT, UE46D6000TPXZT, UE32D6000TPXZT Plug & Play Initial Setup

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎Before turning on the TV, make sure the antenna cable is connected (p. 6). ✎✎The option may differ depending on country.

1 Selecting the OSD Language

2 Setting up the Network

3 Software upgrade

4 Selectingmode the usage

5 Selecting a country

6 SettingMode the Clock

7 Selecting search options for auto tuning

8 Set the channel ordering.

9 Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired OSD (On Screen Display) language.

Set up your network connection. Press the ENTEREbutton to start. If you do not know your network set up information or want to set to it later, select Skip. We suggest you skip network connection setup now and refer to “Network menu” in the e-Manual for set up requirements and instructions, and the Network Connection section of this manual (Page 13).

You can set up the network connection later using the Network menu.

When network connection settings are complete, Software Upgrade is available. Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to "Software Upgrade" (Preference → Support) in the e-Manual.

✎✎This may take some time, depending on network status.

Press the ▲ or ▼ button to select Home Use, and then press the ENTERE button twice.

Select the Home Use mode. Store Demo mode is for retail environments. Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the appropriate country.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎✎When you input the PIN number, “0-0-0-0” is not available.

✎✎The option may differ depending on country. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels.

For more information, refer to Channel - Memorising Channels - Auto Tuning.

✎✎Press the ENTEREbutton at any time to interrupt the memorisation process.

Channels found will be automatically ordered following criteria established by all the main national and local television stations.

If you want to watch a broadcast program, select Close. If you want to enjoy the Smart Hub, select the Smart Hub. The Smart Hub will start. For more detailed information, refer to “Smart Hub” in the e-Manual.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 7