33
English
04 Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦Setting Up Anynet+ O
MENU
m
→ Application → Anynet+ (HDMI-CEC) → ENTER
E
■Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI-CEC) fu nction is disabled, all the Any net+ related operations are deactivate d.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external devic es will turn off at the same time as t he TV powers off.
However, a device may not turn off if recording is in p rogress.
✎
May not be enabled depending on the d evice.
¦Switching between Anynet+ Devices 1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you want, press th e Red button to refresh the list.
2. Select a device and press the ENTER
E
button. You can switch to the selected device.
✎
The Device List menu will only ap pear when you set Anynet+ (HDMI -CEC) to On in the Applicatio n menu.
x
Switching to the selected device may take u p to 2 minutes. You cannot cancel the operatio n during the switching
operation.
x
If you have selected external input mo de by pressing the SOURCE button, yo u cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Devi ce List.
[UC32C4000]BN68-02651B-Eng.indb 33 2010-06-24 오후 3:21:10