Regulatory Compliance Statements
-Federal Communications Commission (FCC) -USA
-Industry Canada Equipment Standard for Digital Equipment (ICES-003) -Canada
-Voluntary Control Council for Interference (VCCI) -Japan
-Bureau
of
Standards Metrology and Inspection (BSMI)- Taiwan
-Korea Communications Commission(KCC) -Republic
of
Korea
-Italian Post Ministry (Homologation) -Italy
FCC Class A Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.

rEI

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is
operated
in
a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in
accordance with
the instruction manual, may cause harmful interference to radio communications. Operation
of
this equipment
in
a residential area
is
likely to cause harmful interference
in
which case the user will be required to correct the interference at his own expense.
FCC Class 8 Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.

rEI

This equipment has been tested and found
to
comply with the limits for a Class B digital device, pursuant
to
Part 15
of
the FCC
Rules. These limits are designed
to
provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the instructions,
may cause harmful interference
to
radio communications. However, there
is
no guarantee that interference will not
occur
in
a
particular installation.
If
this equipment
does
cause harmful interference
to
radio
or
television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to
try
to
correct the interference by one
or
more
of
the following measures:
-Reorient
or
relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to
which the receiver
is
connected.
-Consult the dealer
or
an experienced radio!TV technician for help.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
If
necessary, consult with your dealer or
an
experienced radio/television technician for additiona suggestions.
You
may find the
booklet called How to Identify and Resolve Radio!TV Interference Problems helpful. This booklet was prepared by the Federal Communications
Commission.
It
is
available from the U.S. Government Printing Office. Washington,
DC
20402, Stock Number 004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO.,
LTD.
America QA Lab of Samsung
3351
Michelson Drive
Suite #290, Irvine, CA92612 USA

~~~~~~~---------------------------------------------------------------------------------

User must use shielded signal interface cables
to
maintain FCC compliance for the product. Provided with this monitor
is
a detachable
power
supply cord with IEC320 style terminations. It may be suitable for connection
to
any UL Listed personal
computer
with similar
configuration. Before making the connection, make sure the voltage rating
of
the
computer
convenience outlet
is
the same as the monitor
and that the ampere rating
of
the
computer
convenience outlet is equal or exceeds the monitor voltage rating. For
120
Volt applications,
use only
UL
Listed detachable
power
cord with NEMA configuration 5-15P type(parallel blades) plug cap. For
240
Volt applications use
only UL Listed detachable
power
supply cord with NEMA configuration
6-15P
type (tandem blades) plug cap. This television receiver
provides display
of
television closed captioning
in
accordance with Section 15.119
of
the FCC rules.
(TV
broadcast receivers with picture
screens
13
inches
or
larger
in
diameter models only)